ENGINEER PA07 Wire Stripper
-
Very round finish of wires after stripping by sharp and precise edge
-
Made of carbon steel alloy withstanding abrasions
-
No damage given to core wires
-
Suitable for both solid and stranded wires
-
Oil resistant Elastomer (TPR) handleÂ
Â
Features
“ENGINEER” original Joint screw is very convenient for easy maintenance.
Long-lasting precise cutter owing to
the elaborately-sharpened edges and
anti-corrosive carbon steel material.
with strap hole
Â
Application Size Charts
PA-07Â for thick wire
Â
Stripper’s Hole Diameter | 0.8 | 0.95 | 1.15 | 1.45 | 1.8 | 2.1 | 2.5 | ||
Applicable Wire |
AWG Conversion |
Stranded | 24 | 22 | 20 | 18 | 16 | 14 | 12 |
Solid wire | 22 | 20 | 18 | 16 | 14 | (12) | (10) |
( ): Reference only
Â
How to adjust the joint screw
(1) When the joint screw gets loose, stripping work
becomes dull.
(2) Hold the hex bolt
(Reverse side) with a wrench.
(3)Â Fasten the joint screw with a hex key wrench.
(Torque less than 2 N/m)
=CAUTION=
Do not attempt to adjust the bolt with nut from both sides with 2 pcs. of wrenches, which causes the screw joint broken. Use a hex key wrench for fastening with torque of less than 2 N/m.